Lower connecting circuit for blinds 127mm

LULUES for the school and kindergarten is a necessary remedy for protection from the sun and heat, they protect the room from heating and create comfortable conditions for study and work. Often, blinds in school should be strong enough, as they are used more often than at home. For schools, vertical blinds in light colors are often selected, they do not attract attention and allow you to concentrate on study. A big plus of vertical blinds is their versatility and strength of the structure. Separate fabric lamelons are quite strong, do not think and are practically not subject to damage. Also, when turning the lamella, the system passes a large amount of air, which allows you to easily ventilate the room without opening the window. In case of damage to individual elements of the blinds, you can easily replace them with new ones without changing the whole product. Even in case of damage to the cornice, which is a supporting structure, it can be replaced separately, without changing the entire product with a new one.
One of the main breakdowns of vertical blinds is damage to the lamellas, as well as the lower connecting chain and tissue weights. All the necessary components for the repair of vertical blinds can be bought on our website at prices from the manufacturer.
To replace the lower chain, it is necessary to perform the following procedure:
1. Determine the length of the chain that will need to be ordered for replacement. To easily find out the required chain length, there are two options.
a) remove the old chain and measure its length, then order the same. cornice and start from their number. The calculation of the length of the chain is made according to the following formula: the number of lamellas * 2 / 7. That is, it is required to take the amount of lamellas, multiply it by 2, since the chain is fixed on both sides of the product and divide this value by 7 - because 1meter is necessary 7 hooks. As a result, you get the necessary number of meters of the chain for replacement.
2. After we determined the length of the chain it must be ordered, we recommend ordering the chain from us, since we are the manufacturer and sell the components at wholesale prices. < Br /> 3. Now that you have received a new chain, you need to remove the old one from the product and replace it with a new chain. To do this, it is enough to disconnect all the hooks of the old chain and fix the new without missing hooks.

We draw your attention to that this instruction is applicable for replacing the lower chain with vertical blinds with 127mm width lamps. If it is necessary to measure the lower chain on the blinds with the lamps of 89mm width, it is enough to divide the number of lamellas not by 7pcs, but by 9, because on narrower lamelles there are a larger number of hooks per meter of the chain.